The properties of hot household hygroscopic materials and their potential use for non-medical facemask decontamination.

The widespread use of facemasks throughout the population is recommended by the WHO to reduce transmission of the SARS-CoV-2 virus. As some regions of the world are facing mask shortages, reuse may be necessary. However, used masks are considered as a potential hazard that may spread and transmit disease if they are not decontaminated correctly and systematically before reuse. As a result, the inappropriate decontamination practices that are commonly witnessed in the general public are challenging management of the epidemic at a large scale. To achieve public acceptance and implementation, decontamination procedures need to be low-cost and simple. We propose the use of hot hygroscopic materials to decontaminate non-medical facemasks in household settings. We report on the inactivation of a viral load on a facial mask exposed to hot hygroscopic materials for 15 minutes. As opposed to recent academic studies whereby decontamination is achieved by maintaining heat and humidity above a given value, a more flexible procedure is proposed here using a slow decaying pattern, which is both effective and easier to implement, suggesting straightforward public deployment and hence reliable implementation by the population.

Evaluation of in vitro activity of copper gluconate against SARS-CoV-2 using confocal microscopy-based high content screening.

CONTEXT: Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) that emerged late in 2019 is the etiologic agent of coronavirus disease 2019 (Covid-19). There is an urgent need to develop curative and preventive therapeutics to limit the current pandemic and to prevent the re-emergence of Covid-19. This study aimed to assess the in vitro activity of copper gluconate against SARS-CoV-2. METHODS: Vero E6 cells were cultured with or without copper gluconate 18-24 hours before infection. Cells were infected with a recombinant GFP expressing SARS-CoV-2. Cells were infected with a recombinant GFP expressing SARS-CoV-2. Infected cells were incubated in fresh medium containing varying concentration of copper gluconate (supplemented with bovine serum albumin or not) for an additional 48 -h period. The infection level was measured by the confocal microscopy-based high content screening method. The cell viability in presence of copper gluconate was assessed by XTT and propidium iodide assays. RESULTS: The viability of Vero E6 cells exposed to copper gluconate up to 200 µM was found to be similar to that of unexposed cells, but it dropped below 70 % with 400 µM of this agent after 72 h of continuous exposure. The infection rate was 23.8 %, 18.9 %, 20.6 %, 6.9 %, 5.3 % and 5.2 % in cells treated prior infection with 0, 2, 10, 25, 50 and 100 µM of copper gluconate respectively. As compared to untreated cells, the number of infected cells was reduced by 71 %, 77 %, and 78 % with 25, 50, and 100 µM of copper gluconate respectively (p < 0.05). In cells treated only post-infection, the rate of infection dropped by 73 % with 100 µM of copper gluconate (p < 0.05). However, the antiviral activity of copper gluconate was abolished by the addition of bovine serum albumin. CONCLUSION: Copper gluconate was found to mitigate SARS-CoV-2 infection in Vero E6 cells but this effect was abolished by albumin, which suggests that copper will not retain its activity in serum. Furthers studies are needed to investigate whether copper gluconate could be of benefit in mucosal administration such as mouthwash, nasal spray or aerosols.

New insights into the standard method of assessing bacterial filtration efficiency of medical face masks.

Based on the current knowledge of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) transmission, wearing a mask has been recommended during the COVID-19 pandemic. Bacterial filtration efficiency (BFE) measurements enable designing and regulating medical masks to prevent bioaerosol dissemination; however, despite the simplicity of these measurements, several scientific questions remain unanswered regarding BFE tests. Here, we investigated (1) the impact of substituting 100-mm Petri dishes with 90-mm disposable Petri dishes, (2) the impact of colony-counting methods on the bioaerosol aerodynamic size, and (3) the impact of colony-counting methods on the total viable particle counts. We demonstrated that disposable 90-mm Petri dishes can be used to replace the 100-mm dishes. We also showed that an automatic high-resolution colony counter can be used to directly count viable particles on collection substrates and to measure the bioaerosol size parameters. Our results enable possible modernization of the outdated testing methods recommended in the US and European standards for BFE measurements. Specifically, use of a modernized colony counter should be clearly regulated and permitted to avoid the counting of positive holes. The median aerodynamic diameter appears to be the most relevant parameter for characterizing bioaerosol size.

Assessment of Respiratory Bacterial Coinfections Among Severe Acute Respiratory Syndrome Coronavirus 2-Positive Patients Hospitalized in Intensive Care Units Using Conventional Culture and BioFire, FilmArray Pneumonia Panel Plus Assay.

BACKGROUND: Approximately 15% of patients infected by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) present with severe forms of the disease and require hospitalization in intensive care units, which has been associated with high mortality rates. The prevalence of bacterial infections in these patients is not well established, and more data are needed to guide empiric antibiotic therapy and improve patient outcomes. METHODS: In this prospective multicenter study, we assessed bacterial coinfections identified in culture from 99 French patients infected by SARS-Cov-2 and hospitalized in intensive care units. We concomitantly evaluated an innovative molecular diagnostic technology technique, the BioFire, FilmArray Pneumonia Panel plus (FA-pneumo) assay, to identify these coinfections at an early stage, and its concordance with conventional culture. RESULTS: We showed that a bacterial coinfection was detected in 15% of patients based on conventional culture. Staphylococcus aureus and Haemophilus influenzae were the most prevalent pathogens. The sensitivity of FA-pneumo compared with culture was 100%. In contrast, the specificity varied between 88.4% and 100% according to the pathogen, and our results highlighted that 60.5% of bacterial targets reported using this assay were not recovered by culture; 76.9% of discordant results corresponded to bacteria belonging to commensal oral flora and/or reported with ≤105 copies/mL bacterial nucleic acids. CONCLUSIONS: Based on its excellent sensitivity, the FA-pneumo assay is useful to rule out bacterial coinfections in the context of severe SARS-CoV-2 infection and avoid the inappropriate prescription of antibiotics. However, positive tests should be interpreted carefully, taking into consideration deoxyribonucleic acid bacterial load and all clinical and biological signs.

Controlled Heat and Humidity-Based Treatment for the Reuse of Personal Protective Equipment: A Pragmatic Proof-of-Concept to Address the Mass Shortage of Surgical Masks and N95/FFP2 Respirators and to Prevent the SARS-CoV2 Transmission.

Background: The coronavirus infectious disease-2019 (COVID-19) pandemic has led to an unprecedented shortage of healthcare resources, primarily personal protective equipment like surgical masks, and N95/filtering face piece type 2 (FFP2) respirators. Objective: Reuse of surgical masks and N95/FFP2 respirators may circumvent the supply chain constraints and thus overcome mass shortage. Methods, design, setting, and measurement: Herein, we tested the effects of dry- and moist-air controlled heating treatment on structure and chemical integrity, decontamination yield, and filtration performance of surgical masks and FFP2 respirators. Results: We found that treatment in a climate chamber at 70°C during 1 h with 75% humidity rate was adequate for enabling substantial decontamination of both respiratory viruses, oropharyngeal bacteria, and model animal coronaviuses, while maintaining a satisfying filtering capacity. Limitations: Further studies are now required to confirm the feasibility of the whole process during routine practice. Conclusion: Our findings provide compelling evidence for the recycling of pre-used surgical masks and N95/FFP2 respirators in case of imminent mass shortfall.

Brief comparative evaluation of six open one-step RT-qPCR mastermixes for the detection of SARS-CoV-2 RNA using a Taqman probe.

BACKGROUND: Facing the emergence of a new RNA virus, clinical laboratories are often helpless in the case of a shortage of reagents recommended by Reference Centres. OBJECTIVES: To compare five open one step RT-qPCR reagents to the SuperScript™ III Platinum™ One-Step qRT-PCR kit (Invitrogen) considered as the reference one in France at the beginning of the pandemic for detection of the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) in respiratory specimens by using a laboratory-developed assay targeting the viral RNA dependant RNA polymerase (RdRp) gene. STUDY DESIGN: A total of 51 NUCLISENS easyMAG extracts from respiratory specimens was tested on ABI 7500 thermocycler with TaqMan Fast Virus 1-Step Master Mix (Applied Biosystems), Luna® Universal Probe One-Step RT-qPCR Kit (New England Biolabs), GoTaq® Probe 1- Step RT-qPCR System (Promega), LightCycler® Multiplex RNA Virus Master (Roche) and One-step PrimeScript RT-PCR kit (Takara). The CT values obtained using the 5 challenged reagents were compared to those obtained using the reference assay. RESULTS: The percentages of concordance were all above 95 %. When comparing the CT values of the 48 extracts exhibiting CT values < 35 obtained with the reference reagent, the results were similar between the reagents although the differences of CT values were quite dispersed. CONCLUSIONS: All five reagents can be considered as alternative reagents to the reference for detecting SARS-CoV-2 RNA.